2026-05-11 13:07:03
916
143
Flex Slug
@BuildZo_1825224
Donate
Message
Follow
Recommended printing method
Add
flex slug
Kobra S1
Kobra 3
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
/ Plates:1
/ 2h39m
32
Share
Description
Layer Height: 0.20 mm
Wall Count: 3 walls
Top/Bottom Layers: 4
Infill: 10–15% Gyroid or Grid
Print Speed: 40–50 mm/s
- Nozzle Temperature:PLA: 200–210°C
- Bed Temperature:PLA: 55–60°C
Supports: Not needed
Brim: Optional (3–5 mm for better adhesion)
Cooling Fan: 100% after first few layers
Orientation: Print flat on the bed
Seam Position: Random for smoother look
Tolerance: Leave joints slightly loose for better flexibility
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
