2026-07-10 02:15:31
539
11
Naruto Pokeball Style - Keychain
@Martelo3D_5677682
Donate
Message
Follow
Recommended printing method
Add
0.2mm LH - PRINT BY OBJECT - ACE not required
Kobra 3 V2
Kobra 3
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 Max
/ Plates:2
/ 4h0m
4
Share
Description
This model can be slightly challenging to print due to its curved surfaces.
If you're printing with PETG or PLA, you should have no issues. However, ABS MIGHT be a bit trickier, so ensure your bed adhesion is perfectly dialed in.
- Layer Height: 0.2mm is perfect.
- Speed: Print slowly for best results.
- Bed Adhesion: A brim is highly recommended.
Assembly video if you need: https://youtube.com/shorts/et_LE2VeYa0
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
