Hot Topics

  • Challenge
  • Weekly Print Reward
  • Weekly Featured Model Reward
  • Designer Invitation Reward
  • More Colors More Ways
  • Anycubic Creative Kit
  • MakerOnline Story Reward
  • Practical 3D Prints Contest
  • Suggestions for Makeronline improvement
  • Suggestions for AC Slicer & Photon workshop & APP
#Daily Model Reward# - Set of 3 scrapers
#Daily Model Reward#

As an owner of both a resin and fdm printer i frequently use and wear out scrapers, in particular on the resin printer removing item from the build plate.

Today i decided to design a set of 3 scrapers for Anycubic (or any other) printers.

Print in ABS or PETG for best results but PLA will work, lower layer thickness for smoothest blade.

20240609_125503289_iOS (Makerworld).jpg20240609_125514616_iOS 1.jpg

20240609_125519571_iOS 1.jpg20240609_125525176_iOS 1.jpg

Set of 3 Scrapers

The Digital Tinker

2024-06-09 21:10
xiaoxi23 1 xiaoxi0 zhuanfa
0/1000
emojiEmoji
picture Picture (Support JPG, JPEG, PNG, GIF, WEBP, single image size within 30MB)
All Comments0
Empty Image

Here is empty

{{em}}

Support

Customer Support
Anycubic WIKI

Announcement

Community Guidelines
Campaign Guide