Hot Topics

  • Challenge
  • Weekly Print Reward
  • Weekly Featured Model Reward
  • Designer Invitation Reward
  • More Colors More Ways
  • Anycubic Creative Kit
  • MakerOnline Story Reward
  • Practical 3D Prints Contest
  • Suggestions for Makeronline improvement
  • Suggestions for AC Slicer & Photon workshop & APP
Flakpanzer Gepard Kit Card BY Hatanima (2024-06-04 13:35)
#Daily Print Reward#

Hi,

This is my first time posting a printing post on MakerOnline, please let me know if my post is missing anything😆.

这是我第一次发打印帖,大佬轻喷😆。


I made this fun Flakpanzer Gepard model by Hatanima today and found it very detailed and resembles the real weapon well.

今天打印了 Hatanima 做的这个 Flakpanzer Gepard 模型。细节满满,很仿真。

P20240603-153326.jpg

It was printed on my upgraded Anycubic Kobra Plus using Matte Skin filament. In hindsight, I should have used regular PLA for better layer adhesion because I broke a few connector pins during assembly. I had to use super glue, but the result looks great nevertheless.

我用了我的魔改纵维立方Kobra Plus打印的磨砂肤色耗材。事后诸葛亮,我应该用普通的PLA打印,磨砂的层粘性太差了,组装的时候断了几个插销,最后只能上502,不过成品还是挺让我满意的。

Screenshot 2024-06-03 222025.jpg

P20240603-144758.jpg


I sliced it in Anycubic slicer and uploaded the printing profile onto the uploader's webpage. I had some trouble initially because the uploader's 3MF is not generic and had to be run through another slicer first. I scaled this from 1:100 to 1:72 to bring more details out.

我用了Anycubic切片软件切片,并在原作品链接上传了一份打印配置。作者上传的3MF文件不是通用的,害得我只能在另一个切片软件中倒一遍。我把模型从1:100放大到了1:72以让细节看的更清楚。


Some other pictures 别的一些照片

P20240603-150446.jpg

P20240603-153254.jpg

P20240603-153920.jpg





Flakpanzer Gepard Kit Card

Hatanima

Update:2024-06-04 13:56
xiaoxi74 4 xiaoxi3 zhuanfa
0/1000
emojiEmoji
picture Picture (Support JPG, JPEG, PNG, GIF, WEBP, single image size within 30MB)
All Comments3
Link to the author: https://www.makeronline.com/user/personalInfo/8f57a2b3-cd5e-4dda-96d8-d453f93ffa51.html
2024-06-08 13:44
reply 0
要是涂装的 就完美了😏
2024-06-05 14:21
reply 0
电容电阻分不清 Anxiety
@Anxiety_2680112
哈哈,确实
2024-06-08 13:43
reply 0
{{em}}

Support

Customer Support
Anycubic WIKI

Announcement

Community Guidelines
Campaign Guide