Hot Topics

  • Challenge
  • Weekly Print Reward
  • Weekly Featured Model Reward
  • Designer Invitation Reward
  • More Colors More Ways
  • Anycubic Creative Kit
  • MakerOnline Story Reward
  • Practical 3D Prints Contest
  • Suggestions for Makeronline improvement
  • Suggestions for AC Slicer & Photon workshop & APP
My print of "Anycubic Carousel Kit" by "Makeronline" completed with the "Anycubic Carousel Creative Kit" (2024-05-28)
#Anycubic Creative Kit#

Hello !

My print, in PLA, of "Anycubic Carousel Kit" by "Makeronline" completed with the "Anycubic Carousel Creative Kit" (2024-05-28).


IMG_20240523_151711.jpg IMG_20240523_151837.jpg

(As I don't know if my video will play or not, have the right codec or not, I took the time to put it on my YouTube account at https://youtu.be/HQaOBBbvm0c )

Slicer : AnycubicSlicer 1.3.2 (Win)

Printer : Anycubic Kobra 2 Pro

Filament profil : "Anycubic PLA @KOBRA2 PRO"

Print Settings profil : "QUALITY @KOBRA2 PRO 0.16mm" (Brim and printing supports when necessary.)


Files at 100% scale.

Filament used : EN-PLA Rainbow Creality

2024-05-12 17_16_59-.jpg 2024-05-12 17_47_43-.jpg 2024-05-12 22_33_16-.jpg 2024-05-12 22_34_43-.jpg 2024-05-12 22_35_23-.jpg 2024-05-12 22_35_59-.jpg

Print 1 : Baseplate.stl ( 56.78MB, with non-manifold edges but slice result seems coherent, not designed to be splittable to easily print parts in different colors ) ~ 4 h 01 minutes of print

Print 2 : Cover of rotating plate.stl ( 635.53KB ) ~ 49 minutes of print

Print 3 : Rotating plate.stl ( 46.61MB ) ~ 2 h 34 minutes of print

Print 4 : Flatbed horse×4.stl (x4) ( 46.61MB, at the time I didn't think to see about placing a change of filament according to the height, the reliefs possibly seem to be able to allow this. ) ~ 1 h 06 minutes of print

Print 5 : Cover plate of roof .stl ~ 52 minutes of print

Print 6 : Roof.stl ( 203.84MB, with non-manifold edges but slice result seems coherent, not designed to be splittable to easily print parts in different colors ) ~ 6 h 22 minutes of print

IMG_20240514_145653.jpg IMG_20240514_145708.jpg IMG_20240514_145747.jpg

After removal of brims and printing supports, and slight deburring of certain elements printed with a brim.

IMG_20240514_150149.jpg IMG_20240514_150619.jpg IMG_20240514_150629.jpg IMG_20240514_150635.jpg IMG_20240514_150639.jpg IMG_20240514_150650.jpg

( Note that in the six previous photos there is no kit installed. )

Since I was lucky enough to earn enough points on MakerOnline, I was able to buy for almost nothing thanks to a 10 USD coupon exchanged for points, an "Anycubic Carousel Creative Kit"

Which even if it was sent from China in my case, arrived relatively quickly at my home (around 8 days of transit to travel from China to France)

IMG_20240523_131610.jpg IMG_20240523_131630.jpg IMG_20240523_131759.jpg IMG_20240523_131809.jpg IMG_20240523_131849.jpg

No difficulty putting the kit in place (I haven't yet put the screws to fix the horses)

IMG_20240523_150920.jpg IMG_20240523_151130.jpg IMG_20240523_151136.jpg IMG_20240523_151147.jpg IMG_20240523_151546.jpg

Thanks to "Makeronline" for this lovely model and its Creative Kit, that is relatively easy to print and simple to assemble.


Topic posted as an entry for the

🎁Win $50 Weekly in the Anycubic Creative Kit Showcase!

#Anycubic Creative Kit#


Good luck to all participants

and good continuation to all.

Anycubic Carousel Kit

Makeronline

2024-05-28 19:53
xiaoxi86 5 xiaoxi2 zhuanfa
0/1000
emojiEmoji
picture Picture (Support JPG, JPEG, PNG, GIF, WEBP, single image size within 30MB)
All Comments2
very beautiful 😱
2024-05-30 23:06
reply 1
Wow that looks amazing! I'll check that filament out!
2024-05-29 02:57
reply 1
{{em}}

Support

Customer Support
Anycubic WIKI

Announcement

Community Guidelines
Campaign Guide