Hot Topics

  • Challenge
  • Weekly Print Reward
  • Weekly Featured Model Reward
  • Designer Invitation Reward
  • More Colors More Ways
  • Anycubic Creative Kit
  • MakerOnline Story Reward
  • Practical 3D Prints Contest
  • Suggestions for Makeronline improvement
  • Suggestions for AC Slicer & Photon workshop & APP
My print of "Stylish Lantern Plant Pot" by "Frikarte3D"
#Daily Print Reward#

Hello !

My print, in PLA, of "Stylish Lantern Plant Pot" by "Frikarte3D".

IMG_20240605_033615.jpg IMG_20240605_033725.jpg IMG_20240605_151308.jpg IMG_20240605_151338.jpg IMG_20240605_151439.jpg



Slicer : Anycubic Slicer v1.4.1 (Win)

Printer : Anycubic Kobra 2 Pro (Firmware v3.1.2)

Filament profil : "Anycubic PLA @KOBRA2 PRO"

Print Settings profil : "NORMAL @KOBRA2 PRO 0.20mm" modified (Infill Density : 10%, Support : when necessary, Brim : when necessary)


All files/objects at 100% scale.

Printed ".3mf" project files ( prepared under Anycubic Slicer v1.4.1 (Win) from the .stl files provided. )


Filament used : Silk PLA+ Dual Color Black Gold Anycubic



Print 1 : Arc ~ 45 minutes of print. Filament used : 7.36m (printed twice)

2024-06-04 12_23_12-.jpg IMG_20240604_155424.jpg

Print 2 : Base ~ 1 h 35 minutes of print. Filament used : 16.36m

2024-06-04 12_23_34-.jpg IMG_20240604_174326.jpg

Print 3 : Dome + Dome Handle ~ 49 minutes of print. Filament used : 11.77m

2024-06-04 12_23_48-.jpg IMG_20240604_183707.jpg

Print 4 : Side ~ 41 minutes of print. Filament used : 6.68m (printed twice)

2024-06-04 12_24_11-.jpg IMG_20240604_225401.jpg

Print 5 : Pot ~ 2 h 12 minutes of print. Filament used : 21.07m

2024-06-04 12_23_58-.jpg IMG_20240604_211025.jpg

Print 6 : Cover ~ 3 h 13 minutes of print. Filament used : 29.57m

2024-06-04 12_22_39-.jpg IMG_20240605_021858.jpg


IMG_20240605_030110.jpg IMG_20240605_030129.jpg IMG_20240605_030946.jpg


After removal of brims and/or printing supports.

IMG_20240605_032841.jpg IMG_20240605_032934.jpg IMG_20240605_032848.jpg IMG_20240605_032909.jpg IMG_20240605_032915.jpg IMG_20240605_032922.jpg

The nesting tolerances are perfect without having to deburr.


IMG_20240605_033615.jpg IMG_20240605_133234.jpg

(ignore the pieces of tape to hold everything together for the photos, I hadn't glued it yet)


After assembly and gluing of the elements

IMG_20240605_151317.jpg IMG_20240605_151517.jpg IMG_20240605_151331.jpg IMG_20240605_151432.jpg IMG_20240605_151443.jpg IMG_20240605_151455.jpg


A big thanks to "Frikarte3D" for this model, and for, when I asked him by private message via his Instagram, for taking the time to correct and very quickly re-upload the corrected file "Stylish Lantern Plant Pot Cover Frikarte3D.stl" where there was a small alignment/junction problem between its elements.


Topic posted as an entry for the

🏆 Daily 3D Print Reward New Rules (6.1-6.30): Win a $50 Gift Card Every Day! 🚀

#Daily Print Reward#


Good luck to all participants and good continuation to all.

Stylish Lantern Plant Pot

Frikarte3D

Update:2024-06-05 21:57
xiaoxi79 0 xiaoxi0 zhuanfa
0/1000
emojiEmoji
picture Picture (Support JPG, JPEG, PNG, GIF, WEBP, single image size within 30MB)
All Comments0
Empty Image

Here is empty

{{em}}

Support

Customer Support
Anycubic WIKI

Announcement

Community Guidelines
Campaign Guide