2025-09-01 16:00:14
1.6k
92
Pencil Box
@Selle732_865659
Donate
Message
Follow
Recommended printing method
Add
Pencilbox
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:3
/ 4h58m
24
Share
Description
A Pencil Box that lifts your pencils when opening.
I printed it without any supports.
For the briges i printed with 10mm/s.
Assembly:
- To assemble the hinge just stick a piece of filament into it. (If the piece of filament is loose and would fall out, you can melt the ends a bit with a lighter or a soldering iron.)
- The magazine snaps into the housing.
- The little pull rod snaps in at the lid and the magazine.
Have fun printing and leave a like if you like ;-)
If you got any questions don´t hesitate asking through message or comment.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
